- Mar 31, 2022
- 77
- Pool Size
- 11500
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-20
Ok. first let me start by saying I am a 100% believer in the TFP method of balancing water. I do all my own testing, and it is VERY rare that I walk into a pool store (I have to be desperate for something). However, I find that I am tempted to stray from one TFP recommendation on water balancing. I have a SWG (see signature for equipment and testing supplies). I do no like putting unnecessary chemicals in my pool. Here are todays testing results.
FC = 5.5
CC = 0.0
PH = 7.8
TA = 80
CA = 180
CYA = 40 *
Water is TFP Clear.
As you can see my CYA is lower than TFP suggest for SWGs. However, I find that if I keep my SWG on 40% on hot, sunny days it has Absolutely no problem keeping up with Chlorine demand. In fact, at night, I have to lower the SWG to 15% or 20% to keep the FC from going above recommended levels (heck sometimes I turn it off). I run my pump 24 hours a day.
My question is, under the circumstances, is it still recommended to raise the CYA to a minimum of 60 PPM? I have a fiberglass pool, draining is problematic, and I want to keep the total dissolved solids down.
Thanks..
FC = 5.5
CC = 0.0
PH = 7.8
TA = 80
CA = 180
CYA = 40 *
Water is TFP Clear.
As you can see my CYA is lower than TFP suggest for SWGs. However, I find that if I keep my SWG on 40% on hot, sunny days it has Absolutely no problem keeping up with Chlorine demand. In fact, at night, I have to lower the SWG to 15% or 20% to keep the FC from going above recommended levels (heck sometimes I turn it off). I run my pump 24 hours a day.
My question is, under the circumstances, is it still recommended to raise the CYA to a minimum of 60 PPM? I have a fiberglass pool, draining is problematic, and I want to keep the total dissolved solids down.
Thanks..