Hello All,
I am at the point of throwing this thing away. From the first few uses, the on switch became difficult to depress and ultimately failed. I inspected the inside and found large of amounts of metal shavings on the magnet by a loose fitting actuating arm, spring, and fastener. I was ok using my magnet wand from harbor freight to turn it on, but my wife cannot do the same so I’m pleading for any help sourcing all replacement parts below the on button since in my wisdom, I threw all the parts away. I believe it was just a plastic arm with magnet, a lever, spring, and something else… I spent many times emailing the manufacturer who wanted us to send it to China. Unfortunately we are not wealthy enough to have it go missing should that happen, so really hoping someone here can point me in the right direction for those parts.
I am at the point of throwing this thing away. From the first few uses, the on switch became difficult to depress and ultimately failed. I inspected the inside and found large of amounts of metal shavings on the magnet by a loose fitting actuating arm, spring, and fastener. I was ok using my magnet wand from harbor freight to turn it on, but my wife cannot do the same so I’m pleading for any help sourcing all replacement parts below the on button since in my wisdom, I threw all the parts away. I believe it was just a plastic arm with magnet, a lever, spring, and something else… I spent many times emailing the manufacturer who wanted us to send it to China. Unfortunately we are not wealthy enough to have it go missing should that happen, so really hoping someone here can point me in the right direction for those parts.