I had to move my pool pump because of an addition being put on the house. I dug up the lines, pulled them back 8 feet, and cut the flex pipe off and capped it for the winter. Now i am trying to reconnect them to the equipment and I can not get the pvc glue to react with the casing of the flex pipe that was previously buried, any ideas or thoughts?
- Jun 24, 2021
- 16,623
- Pool Size
- 29000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-60 Plus
Can you post a few pictures of the flexible PVC you are trying to cement. Close up and broader would be great. Also post the cleaner, primer and glue you are using. Are you using a flexible PVC cement?
Is the pipe black?
If yes, it is probably poly pipe and you don't use glue.
If yes, it is probably poly pipe and you don't use glue.
For black poly pipe, you use barbed fittings and clamps.
For flex pvc, I recommend that you allow 12 hours to dry before pressurizing.
For flex pvc, I recommend that you allow 12 hours to dry before pressurizing.
Thanks I will, end up having to travel for work, will get to it on the weekend. Thanks for the quick reply