We have a new pool installed and just needed to know what size/type wire was needed for my setup...
115V Motor
60Hz
9.5 Amps
Between 75-80 feet from inside house breaker box and pool...
I have seen a few install the 1/2 8ft long ground rods and bond the pool /motor and back to the GFCI Receptacle...Is this needed or just bond the motor to pool wall..? Thanks
115V Motor
60Hz
9.5 Amps
Between 75-80 feet from inside house breaker box and pool...
I have seen a few install the 1/2 8ft long ground rods and bond the pool /motor and back to the GFCI Receptacle...Is this needed or just bond the motor to pool wall..? Thanks