- Jun 1, 2022
- 26
- Pool Size
- 4400
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- Intex Krystal Clear
Hello! New pool owner here, with limited knowledge. Been reading through PoolSchool and the Forums, as well as the occasional youtube video for set up. Purchased a 15x48 Bestway above ground to entertain the kids this summer and I just purchased an Intex 26441EG Sand Filter Pump and Intex 26667EG Saltwater System with ECO which are being delivered later this week. We are starting to slowly fill the pool (using well water) until the pump arrives. From the research I've done, I believe need to add salt, run the pump, and test water prior to hooking up/running the saltwater system. However, when do I test the water for the other components? I have a hard time believing that everything will read accurately first time filling the pool- some research says to balance pool prior to adding salt, others say to check after. Which do I do first? I feel like it would be silly to add chlorine if my SWG will be converting the salt into it. I've ordered the K2006 and K1766 to use for testing based on what I've read here. Also, after reading the Water Balance for SWGs, I'm understanding that while the SWG setting can be adjusted to change the FC, the CYA, TA, and PH have to be adjusted by additives - are there specific products because it is salt water? Any brands you recommend?
I'll be sure to report back the readings when we have things set up, as I know this is an important step to getting things in order and for more accurate responses from you guys! Thanks in advance for your assistance!
I'll be sure to report back the readings when we have things set up, as I know this is an important step to getting things in order and for more accurate responses from you guys! Thanks in advance for your assistance!