What is this part - I need to replace it

[sas276]

I have a Hayward GVA-24 Valve Actuator and the plate under it is broken. It's cracked pretty bad and I'm taking in a lot of air into my lines. I suspect this is the culprit but I can't find what this piece is anywhere to replace it without buying an entire actuator. Any help is greatly appreciated!

 

[mknauss]

Welcome to the forum.
That is the top of the Jandy valve. Not the actuator. You can take the actuator off of the valve. Four screws.

You can buy parts for that valve. Go to Inyopools. Call them to be sure what you order will fit the valve you have.

Valves - Further Reading

www.troublefreepool.com

Valve Actuators - Further Reading

www.troublefreepool.com

 

[sas276]

Welcome to the forum.
That is the top of the Jandy valve. Not the actuator. You can take the actuator off of the valve. Four screws.

You can buy parts for that valve. Go to Inyopools. Call them to be sure what you order will fit the valve you have.

Valves - Further Reading

www.troublefreepool.com

Valve Actuators - Further Reading

www.troublefreepool.com

THANK YOU!!!

 

[Ahultin]

I have found the oem parts (other than o-rings) for the jandy valves to be more expensive than buying the whole valve. The lid for the 4617 on into shows ~$45
Amazon does sell the atie replacement part for under $10 but quality can be hit or miss