Hello!
Pool is almost 3 years old. The structural warranty on pool goes out at 3 years. This is at the bottom of a u-shaped crack that starts under coping (not through coping) goes through waterline tile down the wall of pool to bottom and comes back up the same wall through waterline tile about 6 feet from the other crack. Crack is currently not large enough to put a dime in at waterline tile. I have vertical tile cracks on adjacent pool wall waterline tile. (My pool is rectangular.) I also have one tile pulling away next to skimmer which is about a foot before the u-shape crack starts. This u-shaped crack goes around a jet on that wall. I am worried that my pool may have been leaking—or still is or will get worse. My water bill has not gone up, however. I have not done any leak tests. I did measure waterline from bottom of waterline tile on four sides of the pool. Waterline on sides measure all within 6/16” of each other. Any ideas on what the picture is and what is causing it? Please advise. Would like to address this issue with pool builder before warranty goes off. Have called pool builder but they have not returned my call. Thank you!
Pool is almost 3 years old. The structural warranty on pool goes out at 3 years. This is at the bottom of a u-shaped crack that starts under coping (not through coping) goes through waterline tile down the wall of pool to bottom and comes back up the same wall through waterline tile about 6 feet from the other crack. Crack is currently not large enough to put a dime in at waterline tile. I have vertical tile cracks on adjacent pool wall waterline tile. (My pool is rectangular.) I also have one tile pulling away next to skimmer which is about a foot before the u-shape crack starts. This u-shaped crack goes around a jet on that wall. I am worried that my pool may have been leaking—or still is or will get worse. My water bill has not gone up, however. I have not done any leak tests. I did measure waterline from bottom of waterline tile on four sides of the pool. Waterline on sides measure all within 6/16” of each other. Any ideas on what the picture is and what is causing it? Please advise. Would like to address this issue with pool builder before warranty goes off. Have called pool builder but they have not returned my call. Thank you!