This was abandoned at a friends rental. Not sure what is needed to make it work, or if it can be made to work. I'm guessing I'm missing a Transformer or some sort of power box?
Thanks for any info.
looks similar to some of the older maytronics bots. pull the debris bag out and look inside the housing for a label there should be one there regardless of the manufacturer
typically either a mesh bag or screen filter if you flip it over there is usually a pair of clips or tabs holding a plate on and the screen goes inside or its a bag that just attaches to the top outlet by a tie string but there should be some type of label or molded markings or numbers on the bot
Looks like the bottom cover and bag are missing as well. These things are not cheap ... it is $800 new. Although spending $200 for a power supply to see if it works is a bit harsh.
Might see if you can find a local dealer to have it checked out and see if it is worth the $200-$300 in parts to get up and running.
I think I will troll ebay for a broken aquabot with PSU, and see if I can make 1 good out of two. No dealers nearby, at least according to aquabot site. Compatible models?
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.
Welcome to TFP! For a wealth of pool care information please check out our free Pool School. If you are in need of specific help then we encourage you to Register and ask us here in the forum!