Yesterday I tested the water early in the morning. FC holding at 16, CC at 0.5. I overshot pH which was at 7.0 (maybe a little lower) and is now 7.6-7.8. That's not a big issue though as our fill and rain water are acidic. My CA is off the charts high, as usual. My fill water tests off the charts high. That's not really an issue with a vinyl pool, but it can cause the water to get cloudy if the pH and water temp hit the sweet spot. The water is still very cold and the pH will come down on it's own soon enough.
CYA is at 30 for now. I'll bring it up to 40 after SLAM is complete. TA is 60. It was at 0.0 so I messed up and brought it up with baking soda AFTER adding 20 Mule Team...duh. That's what caused the pH overshoot.
Yesterday was very cloudy. I tested FC and CC again in the evening and both are steady. FC is 15.5, CC is 0.5. The water is looking good, but still seems to have a tint to it, but maybe it's just the cloud cover. Pump is running 24/7.
Last year, when I installed the new pool there were two very small leaks; one at the skimmer outlet just above the cutout valve and one at the discharge side of the filter. I corrected those issues on Friday. Yesterday, I gathered up the courage to engage the roof mounted solar panels fearing the worst...and NO LEAKS!!! The vacuum breaker did it's job and all of the water drained from the system perfectly.
We had the old 18' AGP for about 15 years and I always battled leaks somewhere. With this build, I was determined to hard plumb everything and get those panels high in the air and strapped down so they couldn't flip over or get hit with the weed-eater. So, for the first time ever, my system is running without a single drip!