Waterproofing a DIY poured concrete spa/baptismal

[vinjoe65]

Hello pool/spa pros

I'm picking up with a DIY project where someone left off. I need all the advice I can get on waterproofing the inside of a poured concrete structure which will be used as a baptismal at our church.

The structure is 8' X 8' X 3' deep and is under a platform so only the inside can be seen. The structure is above ground so no pressure from water from the outside.

Help!!!
Thanks!!!

 

[kimkats]

Has an engineer looked at it to make sure it is safe for water? If so there is a new product called aquaBright that might work for you. Do a search and see what you think.

Kim:Kim;

 

[duraleigh]

If you need to continue DIY, do you have any masonry skills? If so, I would simply plaster it. You have a great work area and a small enough job so you could finish pretty quickly. Plenty of you tube videos.

 

[LI poolguy]

I can't believe I am going to mention this, as I can't stand the commercials, but.....

 

[pooldv]

LOL!! It turns a screen door into a boat. That could actually work, especially if it is left empty for periods of time. Pretty easy touch up too if needed.

 

[LI poolguy]

LOL!! It turns a screen door into a boat. That could actually work, especially if it is left empty for periods of time. Pretty easy touch up too if needed.

It's like a handyman, in a can!