Hey Hey mes amis.... I fix my problem !!! no more milky water. Thanks to all of you for all your useful guidances. Problem was with my quick connect
at the pump inlet. the o-ring inside quick connect was not tight all around, because I used a block to rest my tri-way valve just in front of the pump inlet, that block was too high, so my quick connect wasn't seal tight. I can clearly see the difference, now my pump skimmer is full of water, which wasn't the case before.
Now bring on warm water !!
thanks again
at the pump inlet. the o-ring inside quick connect was not tight all around, because I used a block to rest my tri-way valve just in front of the pump inlet, that block was too high, so my quick connect wasn't seal tight. I can clearly see the difference, now my pump skimmer is full of water, which wasn't the case before.
Now bring on warm water !!
thanks again