Water comes out blower when in spa mode

[ajw22]

It’s not a new install though. It’s been there since the pool was installed in 2005. Didn’t become an issue until after replaster.

I still think you broke something with your screw driver poking in the water/air tee fitting behind the jet.

 

[MrJonMan]

I still think you broke something with your screw driver poking in the water/air tee fitting behind the jet.

That was done after the issue was happening. Jets were removed and checked for blockages.

Now, having said that, something might be broke from when they chipped out the old plaster during demo

 

[mas985]

That was done after the issue was happening. Jets were removed and checked for blockages.

But did you run the pump and blower with the jets removed? That is the only way you will clear the lines.