Something must have liked my crystal clear water last night...there was a large pile of brown gunk (i don't know what) in the corner of the sun shelf this morning.
I don't think it was algae - but this is my first pool and maybe I don't know what algae looks like? I test the water consistently and haven't had an issue with FC or CC.
Spent an hour to clean it up before work, but there is a brown mark where it was (hopefully doesn't stain). I set the pump to run all day and put the SWCG to "Super Chlorinate"...I don't have any liquid chlorine on hand.
Do you experts think I should pick up liquid chlorine and bring up to shock levels as a precaution? Is a full SLAM advised? (I've never had to SLAM before - this is the first sign of anything other than clean water since the pool was completed in Feb) Pool Math says I need to get 4 gallons of liquid chlorine (6 weight??) to bring up to shock level FC: 31. If I need to SLAM, any ideas how many gallons to buy?
Full test results from 48 hours ago and last night (before gunk)...I tested everything two days in a row as I was adding salt & stabilizer. TF-100
7/10/18 ~6:00pm
FC: 8
CC: 0
pH: 7.8 (added ~1cup MA)
CYA: 50 (added just shy of a gallon liquid stabilizer)
TA: 80
Salt: 2800 (added 40lbs)
Water temp 89F
7/11/18 (5:00pm)
FC: 6 (SWCG was off due to salt addition)
CC: 0
pH: 7.5
CYA: 80
TA: 80
Salt: 3200
Water temp 88F
This morning
FC: 6
CC: 0
I didn't test the other things as I noticed the blob of crud just before leaving for work and had to perform a quick clean up to not be more than an hour late.
Spent an hour to clean it up before work, but there is a brown mark where it was (hopefully doesn't stain). I set the pump to run all day and put the SWCG to "Super Chlorinate"...I don't have any liquid chlorine on hand.
Do you experts think I should pick up liquid chlorine and bring up to shock levels as a precaution? Is a full SLAM advised? (I've never had to SLAM before - this is the first sign of anything other than clean water since the pool was completed in Feb) Pool Math says I need to get 4 gallons of liquid chlorine (6 weight??) to bring up to shock level FC: 31. If I need to SLAM, any ideas how many gallons to buy?
Full test results from 48 hours ago and last night (before gunk)...I tested everything two days in a row as I was adding salt & stabilizer. TF-100
7/10/18 ~6:00pm
FC: 8
CC: 0
pH: 7.8 (added ~1cup MA)
CYA: 50 (added just shy of a gallon liquid stabilizer)
TA: 80
Salt: 2800 (added 40lbs)
Water temp 89F
7/11/18 (5:00pm)
FC: 6 (SWCG was off due to salt addition)
CC: 0
pH: 7.5
CYA: 80
TA: 80
Salt: 3200
Water temp 88F
This morning
FC: 6
CC: 0
I didn't test the other things as I noticed the blob of crud just before leaving for work and had to perform a quick clean up to not be more than an hour late.