All I am getting a VSP Comm error and my Tristar pump SP3202VSPND will not start. I opened the pool yesterday and pump was fine for several hours and it suddenly shut off when I was dumping salt in. I went to the AquaPlus (version 3.12) panel and tried turning it off and back on, nothing. I shut off the breakers to the Aqua plus panel and the filter for several minutes same issue.
This am I tried again and checked all the wiring (no issues) between the panel and the pump. The pump is getting the 240 volts but isnt starting. Cycled breakers again and it came back on. THis time ran for about 1-2 hours and shut off. VSP Comm is back. Seems like its intermittent. Not sure what else to try to figure out if its the pump or an issue with the Aquaplus. Everything else on the Aquaplus seems to work just fine.
Have the breaker off now trying to reset. Almost seems like once it gets warm it craps out. Any help would be great.
This am I tried again and checked all the wiring (no issues) between the panel and the pump. The pump is getting the 240 volts but isnt starting. Cycled breakers again and it came back on. THis time ran for about 1-2 hours and shut off. VSP Comm is back. Seems like its intermittent. Not sure what else to try to figure out if its the pump or an issue with the Aquaplus. Everything else on the Aquaplus seems to work just fine.
Have the breaker off now trying to reset. Almost seems like once it gets warm it craps out. Any help would be great.
