For 2.57 at Lowes and Home Depot you can buy the equipment to correct your pressure cleaner such as Polaris 380, 280, etc. from getting
all knotted.
I have made this after viewing the product "Cleaner Clips" which retail on line for 30.00 to 40.00 for 8 pcs.
Equipment needed: 1 10 ft. section of 3/4 inch "Thin Wall PVD Pipe". Be sure and get the thin wall as it is lighter.
cut it in 12 inch sections. The last section will be approx. 1/4 inch shorter but that does not matter.
Thread these sections on your cleaner line between the floats. This goes over the cleaner line very nicely. You may have to rearrange them as needed. I removed the black printing on the PVC pipe with fine sandpaper and very fine steel wool. This makes for better looks and is not necessary unless you are picky like me.
This works just fine and now my pool cleaner line does not get tangled. The cost in only $2.57 and sure beats the competition.
Very easy to do.
Let me know if you like this and if it works for you. Sure did for me. Looks and works great.
all knotted.
I have made this after viewing the product "Cleaner Clips" which retail on line for 30.00 to 40.00 for 8 pcs.
Equipment needed: 1 10 ft. section of 3/4 inch "Thin Wall PVD Pipe". Be sure and get the thin wall as it is lighter.
cut it in 12 inch sections. The last section will be approx. 1/4 inch shorter but that does not matter.
Thread these sections on your cleaner line between the floats. This goes over the cleaner line very nicely. You may have to rearrange them as needed. I removed the black printing on the PVC pipe with fine sandpaper and very fine steel wool. This makes for better looks and is not necessary unless you are picky like me.
This works just fine and now my pool cleaner line does not get tangled. The cost in only $2.57 and sure beats the competition.
Very easy to do.
Let me know if you like this and if it works for you. Sure did for me. Looks and works great.