- Feb 5, 2021
- 10
- Pool Size
- 20000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Jandy Truclear / Ei
Hi all, I had a pool company replace my drain valve. Unfortunately it continued to leak. I decided to take a look and found they had gotten glue on the diverter and in the valve opening.
I replaced the diverter but still leaked. I then tried to scrape the glue from the inside wall of the valve, where the diverter sits against. Got a lot off. Unfortunately it is still leaking. Unsure if I should see if there is more glue to remove or what.
Any advice on what to try, I am trying to avoid replacing the entire valve again.
The pool company that did the work won’t come back to fix.
Any input is appreciated.
I replaced the diverter but still leaked. I then tried to scrape the glue from the inside wall of the valve, where the diverter sits against. Got a lot off. Unfortunately it is still leaking. Unsure if I should see if there is more glue to remove or what.
Any advice on what to try, I am trying to avoid replacing the entire valve again.
The pool company that did the work won’t come back to fix.
Any input is appreciated.