Hi. If anyone can help me I’d be grateful. Did the floc and turned my valve to waste. Took out cartridge filter and began to vacuum to waste. The dirt was then pouring back into the pool from the inlet jets. I tried turning off the valve back to the pool but lost suction and water flow.
Vacuum to Waste after floc- dirt coming through jets
- Thread starter mwilkinson16
- Start date
- Jul 21, 2013
- 53,268
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Welcome to TFP.
Post pics of your equipment pad so we can see how your filter is plumbed to vacuum to waste.
Post pics of your equipment pad so we can see how your filter is plumbed to vacuum to waste.
Attachments
Try an overall picture of the whole thing so people can get an idea of the pipe layout. No need for closeups.
- Jul 21, 2013
- 53,268
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
I need to see the entire plumbing setup from the pump suction to the filter and past.