- Jun 28, 2011
- 3
I have a quiz question for the smart Prologic users on the forum.
I have a Prologic PS4 and Hayward VSP pump. The solar actuator is hooked up on Valve 3. When valve 3 triggers it turns on the solar and kicks the RPM on the pump to what I have it preset for when solar is active. However... I have to turn the VSP pump up very high to prime the solar because my solar is on the second story roof and in the morning when the pump first turns on the VSP primes but, the actuator for solar is off at this time and will not prime the solar. Any idea from the tech folks how I can prime my solar when the actuator trips but, run it at the lowest RPM for energy effiecency.
Thanks!!!
I have a Prologic PS4 and Hayward VSP pump. The solar actuator is hooked up on Valve 3. When valve 3 triggers it turns on the solar and kicks the RPM on the pump to what I have it preset for when solar is active. However... I have to turn the VSP pump up very high to prime the solar because my solar is on the second story roof and in the morning when the pump first turns on the VSP primes but, the actuator for solar is off at this time and will not prime the solar. Any idea from the tech folks how I can prime my solar when the actuator trips but, run it at the lowest RPM for energy effiecency.
Thanks!!!