I made some good progress last evening, now I just need to remark the area where the pool and filter will actually sit and double/triple check to make sure everything is within an inch.
Well, lots of life has happened in the 6 weeks since my last post buy finally I have the bottom ring on pavers and all within 1/4" so now I just need the sand and a day with some helpers to put the wall up.
Life?? What life?? Is there life outside your pool?? Good job on getting them within 1/4"......now get the walls up and liner in before the wind blows!
The wall is up and the liner is in, although I'm not happy with my job yet. I do have about 4" of water in the pool so it won't blow away. My wife got the wrinkles out of the bottom but my walls appear to be off kilter so I'll try to adjust those before I put any more water in.
We are getting excited to be able to do some floating soon!
In this picture you can see the slant on the side wall. I got that straightened out last night so it's ready to be filled. Tonight I'll work on that and starting the TFP treatment.
Not yet Casey. The uprights were still loose so I could get the liner adjusted. My first order of business tonight after work is to get that done and secured.
Thanks Casey! That thought never even occurred to me
Fortunately I was pretty close and now it is plumb, round and filling with water.
Hopefully it will be full enough to install the skimmer after work tonight and get the pump/filter set up.
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.
Welcome to TFP! For a wealth of pool care information please check out our free Pool School. If you are in need of specific help then we encourage you to Register and ask us here in the forum!