- May 20, 2015
- 53
- Pool Size
- 33000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-60 Plus
So I came home today to find that my pump had been running dry for roughly 10 hours. It got so hot that the water inside the hose was steaming. Apparently when it turns off it also loses its prime and never got it back.
So, from what I've read I must begin the search for an air leak and possibly install a check valve as well. I'm having a hard time locating the correct gaskets for my S244T filter...any suggestions?
Any suggestions regarding recommended check valves, places other than the filter to look for leaks, etc. would also be highly appreciated. I may end up replacing my pump now that most seals have likely cooked themselves to death...if so I'll go VS for sure!
So, from what I've read I must begin the search for an air leak and possibly install a check valve as well. I'm having a hard time locating the correct gaskets for my S244T filter...any suggestions?
Any suggestions regarding recommended check valves, places other than the filter to look for leaks, etc. would also be highly appreciated. I may end up replacing my pump now that most seals have likely cooked themselves to death...if so I'll go VS for sure!