Need some advice on locating a blind underground termination of 1.5" PVC 
PB installed a discharge line from the pump pad out into my back yard but never uncovered the discharge end of the pipe. Nice, right?! I have tried pumping water down it to see if I end up with a geyser, but no success. It is possible that the end is capped.
It's 1.5" PVC with at least 3x 90° fittings. Local plumber that I contacted said that their locator snake wouldn't pass thru the 90's.
I have a very general idea of where the discharge end is buried but I'd rather not do exploratory excavation to find this dang thing.
Any suggestions would be greatly appreciated!!
PB installed a discharge line from the pump pad out into my back yard but never uncovered the discharge end of the pipe. Nice, right?! I have tried pumping water down it to see if I end up with a geyser, but no success. It is possible that the end is capped.
It's 1.5" PVC with at least 3x 90° fittings. Local plumber that I contacted said that their locator snake wouldn't pass thru the 90's.
I have a very general idea of where the discharge end is buried but I'd rather not do exploratory excavation to find this dang thing.
Any suggestions would be greatly appreciated!!
