- Jun 23, 2024
- 69
- Pool Size
- 21000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Jandy Aquapure 1400
New pool this past july, and kept it "open" if not cold all summer (Atlanta, GA USA). Once the temps got low enough, I shut down the salt water generator and maintained successfully with LC all winter. Levels are good and ready for the spring and summer.
Now that the water temp is rising, wanted to check in on the right method in the transition time. For example, my temp is hovering in the mid 50s but has gone up to 62 once and will continue to go up and down. I ASSUME I'll wait until I'm consistently over 60 most or all of the time before turning on the SWG?
Also what about the case where I might heat the pool this weekend? It'll be up well over 60 for the couple of days -- just keep LC knowing those temps are artificial or?
Now that the water temp is rising, wanted to check in on the right method in the transition time. For example, my temp is hovering in the mid 50s but has gone up to 62 once and will continue to go up and down. I ASSUME I'll wait until I'm consistently over 60 most or all of the time before turning on the SWG?
Also what about the case where I might heat the pool this weekend? It'll be up well over 60 for the couple of days -- just keep LC knowing those temps are artificial or?