Hi All,
As you may know from my previous posts, my family bought a house with a pool last July. We've been learning about taking care of our pool, bought our TF-1000 kit and have been maintaining desired levels by manually adding bleach and muriatic acid.
So after a bit of time we figured there was a better way to maintain the chlorine...and we know the pool actual has a SWG installed but best we can tell it does not work. It is an AquaRite Electronic Chlorine Generator (Goldline Controls) and I would assume (but do not know for sure) that it was installed with the pool back in 2005/2006. The control board seems to work and I can cycle through the various settings by pushing the diagnostics button. It is showing a salt concentration currently of 2600 ppm (shown in picture).
Is the only thing I need to do to get this working properly is to buy a new salt cell? I was looking at this one on Amazon:
http://www.amazon.com/Hayward-Goldl...p/B002EL40RM/ref=cm_cr_pr_product_top?ie=UTF8
In terms of installation, is it just plug and play? What else am I missing?
Thank you for the help in understanding this system.
As you may know from my previous posts, my family bought a house with a pool last July. We've been learning about taking care of our pool, bought our TF-1000 kit and have been maintaining desired levels by manually adding bleach and muriatic acid.
So after a bit of time we figured there was a better way to maintain the chlorine...and we know the pool actual has a SWG installed but best we can tell it does not work. It is an AquaRite Electronic Chlorine Generator (Goldline Controls) and I would assume (but do not know for sure) that it was installed with the pool back in 2005/2006. The control board seems to work and I can cycle through the various settings by pushing the diagnostics button. It is showing a salt concentration currently of 2600 ppm (shown in picture).
Is the only thing I need to do to get this working properly is to buy a new salt cell? I was looking at this one on Amazon:
http://www.amazon.com/Hayward-Goldl...p/B002EL40RM/ref=cm_cr_pr_product_top?ie=UTF8
In terms of installation, is it just plug and play? What else am I missing?
Thank you for the help in understanding this system.