The green monster
- Thread starter jamesky
- Start date
- May 3, 2014
- 62,923
- Pool Size
- 6000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
What is your TA and pH?
If you are using the Poolmath app, be sure to share your data so we can see it.
If you are using the Poolmath app, be sure to share your data so we can see it.
His last post he said his TA was 40.... if you add 11lbs that will put you near 100 which is too high and you will see your pH rise too much.
I would not add 11 lbs... maybe 5 lbs and recheck next day (if your TA is 40)...
I would not add 11 lbs... maybe 5 lbs and recheck next day (if your TA is 40)...
TA 20 as of today
How much of that Leslie's pool stuff should I add. The calculator says baking soda.
How much of that Leslie's pool stuff should I add. The calculator says baking soda.
- May 3, 2014
- 62,923
- Pool Size
- 6000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
As Justin said, add half and let circulate. Test again tomorrow to see where you at.
Easy to add more the next day... impossible to remove once added. As long as your pH is in the 7s your total alkalinity is not an emergency