Yes! Just for you also I tested 30 mins after an add and was actually 1 ppm over target. So I will just keep calling my 10% 6%...lol
TF-100 readings and my SLAM process
- Thread starter Azgirl71
- Start date
Yes! Just for you also I tested 30 mins after an add and was actually 1 ppm over target. So I will just keep calling my 10% 6%...lol
Sounds like you nailed that one on being 6%....nice job! 
I'm just hoping you don't run out of reagent...better order up some more unless you stocked up plenty of
I'm just hoping you don't run out of reagent...better order up some more unless you stocked up plenty of
Hahaha! Sometimes the 1/2 hour later test can also pinpoint an issue with estimated pool volumes. There is a way to measure your chlorine strength before using it which can then be used with PoolMath to get a pretty accurate pool volume. I can't remember the dilution ratios, but if I find it, I will send it along. You may find that after the slam is over, you will be bored with all your free-time and need some pool-love!
Yea I was thinking the same thing. What is Lisa going to do here next week when this is over? 
She is going to jump in and help others going through what she just did and be a WONDERFUL example of how to do a SLAM the correct way!
Kim
Kim
I found the thread. I am down to my last gallon and a 1/4 of the 10% from day 132 of 2014. I will be going to get some 2015 8.25% tomorrow. Have lots to do unfortunately.
I will be writing a testimonial about how the TFP methotrexate works if done properly and playing catch up on my horse pen and barn...lolYea I was thinking the same thing. What is Lisa going to do here next week when this is over?
That is correct Kim! I will reassure people that if they have patience and follow the TFP method exactly how they are supposed to their pool can also look this good.
- - - Updated - - -
Sounds like you nailed that one on being 6%....nice job!
I'm just hoping you don't run out of reagent...better order up some more unless you stocked up plenty of
I ordered just got 2 more bottles. I don't plan on having to go through it as fast ever again!
It's beautiful! Now you need sunglasses to look at the pool.awesome job!
Thanks Beens!
Did not pass OLCT. Have not checked CC. Will do that later. I am feeling under the weather so I will just keep at it. I am going to brush his morning and add some DE. I did not add any yesterday.
I would do full test.that is the only way to truly know if there is something going on.
Last edited by a moderator:
Wow. The water is looking great! You've done an excellent job and it's starting to pay off. Almost there. Are your arms sore from brushing yet?
Wow. The water is looking great! You've done an excellent job and it's starting to pay off. Almost there. Are your arms sore from brushing yet?
Thanks, I have come a long way. No, not to bad, but the chlorine burns on my right hand and forearm are a bit annoying...lol I just brushed and added DE to the filter.
Be sure to do the 1/2 hour testing after additions when doing the OCLT. I think this is where many people go wrong. You need to know you exact FC readings after dusk to pre-sun morning test.
Thank you. I do my last add around 6 pm if needed. Then check FC at 8pm do not add anything as it has been at or above shock level the past 3/4 nights. I need to be up at 5am to beat the sun. Is this correct?
Also I know the water must be pretty clean as after adding DE this morning and letting it rise 1psi the guage has barely moved. I even brushed before and after the add.
You can be the judge on your alarm time... Personally, I shoot for 1/2 hour after sunrise. TFP says early, but before direct sun hits the pool. (Even if it's overcast). Here's a refresher: http://www.troublefreepool.com/content/136-perform-the-overnight-fc-chlorine-loss-test-oclt
Last edited:
Today's pic.
CC:.5
- - - Updated - - -
I also added DE to filter this morning. 1 backwash around 2 pm and then added DE again. Flow is still good so I should not have to backwash again today.
CC:.5
- - - Updated - - -
I also added DE to filter this morning. 1 backwash around 2 pm and then added DE again. Flow is still good so I should not have to backwash again today.