G
Guest
Hi guys I started my swg last night..
Prior to start up my
FC was 2
Tc 2
Ph 7.4-7.5
Ta is 80-90
This morning after swg start up it seems my
FC is >5
Ph is 7.5
Ta is 100
No cya yet but it is in the pool dissolving still.. I have enough cya to get me to 70
I did the boost for copper production but I woke up with a bad feeling and shut off the machine to clear the boost.. I have the run time set up for 6 hours to start...
This morning I woke up to the pool looking clean but there are these little white flakes in the pool... And The skimmer had this layer of cloudy film...
Is this from my swg ??? I've never had this before the swg is it normal...
Am I on the right track with the swg , right now it's on says working with the number 6 lit up..
Prior to start up my
FC was 2
Tc 2
Ph 7.4-7.5
Ta is 80-90
This morning after swg start up it seems my
FC is >5
Ph is 7.5
Ta is 100
No cya yet but it is in the pool dissolving still.. I have enough cya to get me to 70
I did the boost for copper production but I woke up with a bad feeling and shut off the machine to clear the boost.. I have the run time set up for 6 hours to start...
This morning I woke up to the pool looking clean but there are these little white flakes in the pool... And The skimmer had this layer of cloudy film...
Is this from my swg ??? I've never had this before the swg is it normal...
Am I on the right track with the swg , right now it's on says working with the number 6 lit up..