TF-Pro just arrived today. I'm used to the cheap HTH style kits. I didn't have a problem with the TA test (it came in at 130). The PH test was just like the common kits so that was easy. My PH measured at 8.2 so I know I need to add acid. How do I figure out how much acid is needed? Doesn't the TF-Pro have an acid demand test? That seems to be a big miss on the TF team that creates the kits?
Test results
- Thread starter Ray.Pyle
- Start date
I loaded the app as recommended by the test kit and loaded my first set of results. I didn't see a test for demand in the kit, but I just now checked the Overview in the PM app and clicked on the pH section and found the recommendation. Nice. "Add 57 oz....."
But: It appears that IF I got the TF-Pro but not the Pool Math app I would have to go get another test kit to get the acid demand recommendation? Is that the case? You know the TF kit was not cheap.
But: It appears that IF I got the TF-Pro but not the Pool Math app I would have to go get another test kit to get the acid demand recommendation? Is that the case? You know the TF kit was not cheap.
- Jun 24, 2021
- 15,985
- Pool Size
- 29000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-60 Plus
We don't use acid demand. Not needed with pool math. I have the both kits and I've never used the acid demand, not needed.
You seem to be saying I have to use Pool Math because the TF-Pro kit doesn't provide a way to do it.
- Jun 24, 2021
- 15,985
- Pool Size
- 29000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-60 Plus
This post is for @Ray.Pyle
There are lots of tools that you can use to figure out how much muriatic acid to reduce pH in your pool. PoolMath is one of them.
There are lots of tools that you can use to figure out how much muriatic acid to reduce pH in your pool. PoolMath is one of them.