Temp Calibration on Jandy

[Walter2050]

Good Afternoon. Is there a way to calibrate the temperature on the Jandy aquapure? I know how to calibrate the salt just not sure how to do the temperature
Thank you

 

[ajw22]

You can calibrate the Aqualink water temperature…

Go to MENU>SYSTEM SETUP>TEMP CALIBRATE. This should allow you to calibrate +/- 4 degrees.

 

[JamesW]

 

[Walter2050]

You can calibrate the Aqualink water temperature…

Go to MENU>SYSTEM SETUP>TEMP CALIBRATE. This should allow you to calibrate +/- 4 degrees.

Thank you sir. I seen where I can calibrate on the aqua link sensor but was wondering if the temperature on the aquapure (Tri Sensor ) be calibrated?

 

[JamesW]

I seen where I can calibrate on the aqua link sensor but was wondering if the temperature on the aquapure (Tri Sensor ) be calibrated?

No.

How far is it off?

Do the test procedure to see if the sensor or the board is off.

 

[Walter2050]

No.

How far is it off?

Do the test procedure to see if the sensor or the board is off.

Only 3 degrees from what the aqualink is showing. Not really a big deal . Just curious if it was able to be calibrated

 

[JamesW]

Only 3 degrees from what the AquaLink is showing.

Do you have independent confirmation for which is correct?

The test procedure will show if the board is correct.

 

[Walter2050]

Do you have independent confirmation for which is correct?

The test procedure will show if the board is correct.

No sir not yet . What is the best way to determine what one is off ?

 

[JamesW]

Get a pool thermometer.

 

[Walter2050]

Get a pool thermometer.

Thank you sir

 

[JamesW]

Pentair 127 Tube Thermometer for Pools and Spas with ABS Case and 3' Cord - R141036 - INYOPools.com

Pentair ABS Pool and Spa Thermometer Model 127 With 3" Cord - R141036

www.inyopools.com

https://www.lowes.com/pd/Aqua-EZ-Floating-Pool-Thermometer/1000893

 

[JamesW]

https://www.lowes.com/pd/Aqua-EZ-Floating-Pool-Thermometer/1000893