I’d appreciate some suggestions on addressing high alkalinity in my tab water. I tested my tab water (with suggested testing equipment) and the alkalinity level I got was 220! No wonder I did a partial refill and it ended up shooting up. Any suggestions on some type of hose filter I could use to reduce alkalinity when I add water to my pool? I saw several filters in Amazon but am not sure if they would work. Thanks for any suggestions.
Tab water high alkalinity
- Thread starter Eduardo69
- Start date
-
- Tags
- alkalinity filter tab water
- Jun 24, 2021
- 16,042
- Pool Size
- 29000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-60 Plus
There are no filters that filter out TA.
This can help you....
www.troublefreepool.com
This can help you....
Lowering Total Alkalinity (TA) Quickly with the Acid Aeration Method
Thought I'd make a post that might help others. We've had quite a few members this year with high TA, and I've been typing the same information over and over. I'm going to post this so I can link it to help others. High TA can cause rapid pH rise. High TA is typically caused by high TA fill...
www.troublefreepool.com
- Jan 7, 2012
- 2,123
- Pool Size
- 21000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
In my area of The Woodlands, tap water TA is 330. You'll need MA additions around twice a week, especially during the summer when you're topping up with fill water. Try to harvest a much rainwater as possible.