HELP! Newbie to the forum, pool owner for 7 years. Upon opening the pool from winter, seems as me SWG is not producing chlorine. Salt was high initially at 4000 after adding too much
so I drained and now I am at 3100. Voltage on cell reads OT at 26.?? And current is 5.8? The current was much higher when the salt was elevated but was proportional to the salt level. Everything reads out on the panel as acceptable numbers yet no chlorine out of the returns. Water temp is 68 (Georgia).4 bags of shock then had water tested 2 days later at local store and
TC 1.0
FC 0
Stab 30
PH. 7.5
Calc little low (forgot the numbers)
How can I test the cell to verify since all parameters seem to be showing that it is working properly. 20k gallon.
so I drained and now I am at 3100. Voltage on cell reads OT at 26.?? And current is 5.8? The current was much higher when the salt was elevated but was proportional to the salt level. Everything reads out on the panel as acceptable numbers yet no chlorine out of the returns. Water temp is 68 (Georgia).4 bags of shock then had water tested 2 days later at local store and
TC 1.0
FC 0
Stab 30
PH. 7.5
Calc little low (forgot the numbers)
How can I test the cell to verify since all parameters seem to be showing that it is working properly. 20k gallon.