I inherited a mineral springs pool and need to replace the t-cell. I ordered the proper size Hayward cell and was set to install but the instructions gave me pause. They want me to program the controller to the cell but there doesn’t seem to be an option for that on the controller. Everything else seems to match up. I don’t want to install this expensive part if it isn’t going to work
T-cell compatibility
- Thread starter Chris Hourigan
- Start date
- May 3, 2014
- 58,711
- Pool Size
- 6000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
Welcome to the forum!
Let's ask @JamesW for some assistance.
I suggest you read ABC's of Pool Water Chemistry and consider reviewing the entire Pool School eBook.
Let's ask @JamesW for some assistance.
I suggest you read ABC's of Pool Water Chemistry and consider reviewing the entire Pool School eBook.
What are the diagnostic readings?
What was the old cell size?
What is the new cell size?
What is the salinity as tested by a good test kit?
What is the model number of the box?
What was the old cell size?
What is the new cell size?
What is the salinity as tested by a good test kit?
What is the model number of the box?