My T-15 is constantly reading 300-500 lower than my K-1766 test. Is this ok? The cell is clean and it’s producing chlorine fine. This mismatched readings are just concerning me.
T-15 reads lower than K-1766. OK?
- Thread starter joynun
- Start date
- Jun 1, 2018
- 14,198
- Pool Size
- 26000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-15)
They will likely never match. So long as the swg is happy don’t fret.
Your swg doesn’t determine actual salinity persay- here’s how it works
www.troublefreepool.com
Your swg doesn’t determine actual salinity persay- here’s how it works
Hayward Aquarite SWG - Further Reading
www.troublefreepool.com
Thanks so much for your response. The salt readings were always closer the first couple of years we had the pool. Lately they have been further off, so I just wanted to make sure we didn’t have a problem!
To get the performance of the cell, divide the instant salinity by the actual salinity.
If the ratio is less than 75%, it's time for a new cell.
For example, 2,000 (instant salinity) ÷ 3,600 (measured salinity with a test kit)=56%.
Check the cell and clean it if necessary.
If that doesn't work, it's time for a new cell.
www.troublefreepool.com
If the ratio is less than 75%, it's time for a new cell.
For example, 2,000 (instant salinity) ÷ 3,600 (measured salinity with a test kit)=56%.
Check the cell and clean it if necessary.
If that doesn't work, it's time for a new cell.
Hayward Aquarite SWG - Further Reading
www.troublefreepool.com
Similar threads
