I pulled the trigger today and ordered my SWG today! (Circu Pool RJ45+)
Current readings:
FC 3
PH 7.6 (PH has been very stable)
TA 100 (should I lower TA because of new SWG coming?)
CYA 70
CH 350
Pool Temp 54
CSI -0.12
Should I lower my TA? Some readings seem to suggest if PH is stable not much need to adjust the TA, but others seem to indicate TA should be more in the 60 to 80 range for SWG.
We do make extensive use of a solar cover to raise and then maintain heat. For some reason here in Vegas desert when temps get to 110 the pool feels cold if its not at least 90.
So as an aside when I start runing in SWG mode do I need to factor in the solar cover will be on the majority of the time when not swimming or certainly most evenings to avoid heat loss?
Current readings:
FC 3
PH 7.6 (PH has been very stable)
TA 100 (should I lower TA because of new SWG coming?)
CYA 70
CH 350
Pool Temp 54
CSI -0.12
Should I lower my TA? Some readings seem to suggest if PH is stable not much need to adjust the TA, but others seem to indicate TA should be more in the 60 to 80 range for SWG.
We do make extensive use of a solar cover to raise and then maintain heat. For some reason here in Vegas desert when temps get to 110 the pool feels cold if its not at least 90.
So as an aside when I start runing in SWG mode do I need to factor in the solar cover will be on the majority of the time when not swimming or certainly most evenings to avoid heat loss?