SWG FC True output

yann

0
Aug 15, 2017
273
Blue Mountains, NSW, Australia
Pool Size
36500
Surface
Plaster
Chlorine
Salt Water Generator
SWG Type
Astral VX 7T
Hi all

Is there a way to measure the true chlorine output from my SWG?
I just replaced my genuine cell with a generic one, same rating VX7-T 25g/h of chlorine at 100%

However, I now need to run my pump 10h a day instead of 8h with older cell to maintain FC.
I've done and passed OCLT in case the FC was dropping because of nasties, but not the issue.
I wonder if the cell is delivering less than the 25g/h it's rated for.

Thanks
 
Y,

Not perfect, but you can do a reverse OCLT.. When you run a normal OCLT you should have the cell off, because you are looking for a loss of FC...

Assuming you just passed a normal OCLT, then do one the next night and this time leave the cell on... the amount of FC increase you have overnight has to be from your SWCG..

Thanks for posting,

Jim R.
 
  • Like
Reactions: yann
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.