Looking for some help understanding something here. I have a SupermaxVS pump and an EasyTouch controller. It appears when they built the pool they didn’t use the communication cable but simply have the plug on a relay to turn the pump on and off. Ideally I’d like to be able to controller the speeds from the ScreenLogic app and set up different schedules and speeds. If I added the communication cable should I be able to do this?
SupermaxVS and EasyTouch
- Thread starter ccocotas1
- Start date
1,
Then you are SOL...
Sorry..
Only pumps made after 10/15/20 have the RS-485 option..
Thanks,
Jim R.
Then you are SOL...
Sorry..Only pumps made after 10/15/20 have the RS-485 option..
Thanks,
Jim R.
- Jul 21, 2013
- 65,680
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
See page 7. The communication port in older pumps has wires for external input relays but not RS-485 control.