Hi all - At wits end here... have googled a bunch and am hoping for a new idea.
SR200NA throwing an E01 code on startup. Powers up, runs through the start up cycle, the spa light comes on for .0001 seconds, then an audible "click" and the E01 code appears.
Opened it up, cleaned out the mouse nest inside, no wires appear to be damaged. Everything I read says the Thermistor is the culprit, so installed a new Pentair 42001-0053S but am still seeing the same issue.
Any ideas for what to look at next?
SR200NA throwing an E01 code on startup. Powers up, runs through the start up cycle, the spa light comes on for .0001 seconds, then an audible "click" and the E01 code appears.
Opened it up, cleaned out the mouse nest inside, no wires appear to be damaged. Everything I read says the Thermistor is the culprit, so installed a new Pentair 42001-0053S but am still seeing the same issue.
Any ideas for what to look at next?