Sta-rite heater, not turning on with flow

[Jpw617]

Good morning all, first-time, long-time!

I am having trouble with my sta-rite heater. With no flow, the controller will turn on, allows adjustments and gives the normal no-flow error message.

Upon turning on the pump and making the flow switch, the controller turns off, no response.
Any ideas?

-joel

 

[Jpw617]

Update. This may be some kind of sleep-mode lockout.

Left the pump off for about 30 minutes, reset temperature setpoint, turned pump back on and the heater fired back up. It was previously set to a satisfied temperature