Hello wonderful helpful people!
Got a sta rite that had a quick one red blink led light for AFS + LED 11 and immediately turn off. No other lights red lights turned on at all. Greed led for pool and spa. No other bad indicators.
heater turns on, blower goes on and stays on, suction to afs is really powerful, propane gas is running - can smell it, can hear the valve opening click, but does not ignite....
So we went ahead and installed new AFS and new ignitor
no difference. Same thing happens where red led for afs + LED 11 blink for one millisecond, doesn’t stay on, all other functions work but not ignite, and all else looks good.
took a look inside the tub with my camera through the black metal exhaust and there is no water in it, some debris. Water pressure seems fine and I’m assuming gas pressure is fine too since it used to work
ideas? And thanks so very much!
—-
Little update here, 24 hours later, the filter broke down today.. so I’m wondering if perhaps the heater will work after we replace the filter. Maybe it is water flow... will update again after filter fixed but do appreciate comments
Got a sta rite that had a quick one red blink led light for AFS + LED 11 and immediately turn off. No other lights red lights turned on at all. Greed led for pool and spa. No other bad indicators.
heater turns on, blower goes on and stays on, suction to afs is really powerful, propane gas is running - can smell it, can hear the valve opening click, but does not ignite....
So we went ahead and installed new AFS and new ignitor
no difference. Same thing happens where red led for afs + LED 11 blink for one millisecond, doesn’t stay on, all other functions work but not ignite, and all else looks good.
took a look inside the tub with my camera through the black metal exhaust and there is no water in it, some debris. Water pressure seems fine and I’m assuming gas pressure is fine too since it used to work
ideas? And thanks so very much!
—-
Little update here, 24 hours later, the filter broke down today.. so I’m wondering if perhaps the heater will work after we replace the filter. Maybe it is water flow... will update again after filter fixed but do appreciate comments
Last edited: