The cost of everything Intex has skyrocketed this season. Does anyone have a source for just the hose nuts? I'm looking to hard pipe the backwash line from my sand filter and need a nut. Thanks all.
Source for Intex Hose Nuts
- Thread starter bad_idea
- Start date
- Jul 21, 2013
- 52,229
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
The only thing I have ever found was purchasing the Intex replacement hose adapter A w/collar for threaded connection pumps. Unfortunately like everything else supply and demand would have you paying multiple times the MSRP.
As I will be upgrading the (2) intakes to 1.5" inlets and hard piping with PVC, I would be interested if there was a different avenue.
Amazon.com : Intex Replacement Hose Adapter A w/Collar for Threaded Connection Pumps (Pair) : Garden & Outdoor
Amazon.com : Intex Replacement Hose Adapter A w/Collar for Threaded Connection Pumps (Pair) : Garden & Outdoor
www.amazon.com
As I will be upgrading the (2) intakes to 1.5" inlets and hard piping with PVC, I would be interested if there was a different avenue.
As far as I know intex doesn’t sell the nuts seperately at all. I think your only option is to find an adapter, like shown above or a hose and take a nut from it.
I cut a couple of old hoses and took the nuts from them. i typically hang on to old hoses and such.
You might be able to get away with a 2" fpt adapter LIKE THIS and then adapt it to 1 1/2" slip. I use a 2" MPT adapter to mount my intex hose for my intex pool cleaner with an extra gasket. If you use a decent amount of thread tape I think it's close enough where it will work for you.
Similar threads
