Im getting a tiny drop of water coming from the top of the male/male where it connects to skimmer. Probably 1 drop every 10min. I tefloned taped the threads.I am avoiding plugging the skimmer to pull all this apart. Also afraid of trying to tighten more…Possibly this could stop by itself?
Slightest drip
- Thread starter Rynz
- Start date
- Jun 22, 2014
- 52,024
- Pool Size
- 17888
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
- Jun 22, 2014
- 52,024
- Pool Size
- 17888
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
Ever have those projects where you say to yourself, "It will just take a couple minutes to fix", then it morphs into an all day headache. That's how I look at this one. Ha.
Oh, I feel your pain. Yes, I’d leave. When you do decide to tackle, try some silicone pool lube on the threads as well.
Water is relentless. As long as it’s not causing noticeable water loss or causing flooding leave it be. I sometimes have a little drip between my pump and filter. And where my hose connects to my heater. Not enough to do anything. Regular old evaporation keeps up with it for the most part.