Guys I have been using the troublefreepool method for ~5 years with pretty good results.
One problem I have run into was not being able to find enough bleach (or having to use scented, no splash bleach) when I SLAM due to the combination of a 55,000 gallon pool and not many stores nearby.
I am considering SLAMing with dichlor for a day or two (I will need to watch the CYA levels but I have to add stabilizer anyway).
So my questions are
1) is this ok?
2) if I have an SWG pool but I SLAM it with bleach then turn on the SWG once it’s up and running can I start my SLAM at lower CYA and FC levels (20-30) then gradually walk it up to 70?
55k gallon plaster SWG pool in Westchester NY
One problem I have run into was not being able to find enough bleach (or having to use scented, no splash bleach) when I SLAM due to the combination of a 55,000 gallon pool and not many stores nearby.
I am considering SLAMing with dichlor for a day or two (I will need to watch the CYA levels but I have to add stabilizer anyway).
So my questions are
1) is this ok?
2) if I have an SWG pool but I SLAM it with bleach then turn on the SWG once it’s up and running can I start my SLAM at lower CYA and FC levels (20-30) then gradually walk it up to 70?
55k gallon plaster SWG pool in Westchester NY