Slam done!

Cheetos82

Well-known member
Jun 12, 2016
323
MUSKOGEE, Ok
Pool Size
6021
Surface
Vinyl
Chlorine
Salt Water Generator
SWG Type
Intex Krystal Clear
Ofclt 0
Cc 0
My water is clear

I just have to figure out why I keep getting sand in pool.
I have some dust to vacuum up on bottom from our dirt road but I did ofclt with dust on bottom and passed
18e88f38a10d7dc7d2f6aa068b207ae9.jpg
126f70616132c36067e6542ff832188a.jpg
 
You live in OK, as do I. I used to vacuum the dirt from the bottom of my pool every day. I bought the Intex robot last year and haven't had to vacuum since.

Best $50 I ever spent. But you'll need at least a 2500 gph pump for it to work properly.
 
You live in OK, as do I. I used to vacuum the dirt from the bottom of my pool every day. I bought the Intex robot last year and haven't had to vacuum since.

Best $50 I ever spent. But you'll need at least a 2500 gph pump for it to work properly.
I have a 2800 but I'm worried about it getting snagged since my husband wouldn't do the ground work and its all lumpy
 
Couple questions.
I got in to vacuum there are tiny bubbles all over the side of pool and my skin.
Second...I guess I failed to get in that little flap on bottom all the way around the pool. It was gross I vacuumed but still look yucky. I wouldn't have passed ofclt if it was something other than dirt right?
 
Your pool would have to be really lumpy to hang up the robot.

The little bubbles aren't unusual. I'm not sure what causes them, but I get them too sometimes. I'm sure someone will be able to tell us what they are.
 
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.