- Aug 6, 2018
- 53
- Pool Size
- 7900
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-20
I'm in the process of SLAMMING after switching from Bromine to Chlorine.
My CYA is about 25 and my target FC is around 12 I believe. All else was balanced prior to start using TF100.
This is an outdoor stand alone SPA. Do I have to wait till the SLAM is complete and FC drifts back to target levels before covering the spa to avoid cover damage?
Is the process the same as for a pool, less than 1 ppm FC drop in 12 hours, <.5 ppm FC and clear? My concern here is the FC drop.
I have an ozonator but don't know if it's working - suggestions appreciated.
Thanks
My CYA is about 25 and my target FC is around 12 I believe. All else was balanced prior to start using TF100.
This is an outdoor stand alone SPA. Do I have to wait till the SLAM is complete and FC drifts back to target levels before covering the spa to avoid cover damage?
Is the process the same as for a pool, less than 1 ppm FC drop in 12 hours, <.5 ppm FC and clear? My concern here is the FC drop.
I have an ozonator but don't know if it's working - suggestions appreciated.
Thanks