The day they shoot the shell is a noisy one! The neighbors are probably just anticipating a bunch of screaming kids using your pool this summer.
Just screaming adults, no kids
Signed this morning, new build in Humble, TX
- Thread starter blazeone
- Start date
Just screaming adults, no kids
They are out bright and early again installing the plumbing and equipment today. Should have some pictures later. Cheers
Plumbing and equipment install is complete minus electrical, to be completed tomorrow
Lots of digging
Equipment
My Flovis flow meter I specifically called out. This little jewel gives you the true system flow rate so you can accurately dial in your pump speed for water turn-over.
Electrical goodies waiting in the wings.
Lots of digging
Equipment
My Flovis flow meter I specifically called out. This little jewel gives you the true system flow rate so you can accurately dial in your pump speed for water turn-over.
Electrical goodies waiting in the wings.
Wow that flow meter is awesome. I haven't seen one before. Next time I have to modify my plumbing I am putting one in!
Is it me or do your valves seem too low to the ground? I would think once you put rocks or something around your equipment it will partially cover them up.
Is it me or do your valves seem too low to the ground? I would think once you put rocks or something around your equipment it will partially cover them up.
Just checked it out, camera angle doesn't show it well but there is at least a foot of dirt built up around them that will be graded off.
Been home sick this afternoon, yuk. That time of the year. I did order a Dolphin Triton Plus cleaner
- Jul 16, 2012
- 7,282
- Pool Size
- 27000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-15)
I'd probably grade that dirt off myself to prevent preventable damage to the valves. The help isn't always so careful as you might wish.
ummgood: You don't need to modify your plumbing. Checkout TFTestkits.net. Under Flow Meters and PSI guages they have the FloVis Flow Meter retrofit kit. I have my eye on it. Just a few screws and you are all done. I may wait and replace when my check valve goes bad.
Home sick again today On the positive side the "spark chasers" electricians showed up to do their thing.
On the positive side the "spark chasers" electricians showed up to do their thing.
- May 16, 2011
- 1,184
- Pool Size
- 28000
- Surface
- Plaster
- SWG Type
- Pentair Intellichlor IC-60
Sorry that you're not feeling well. But the electricians coming is a big deal! One more thing to check off!
Before we get plastered we must get stoned They have brought in a huge amount of huge Oklahoma Wister flagstone. It's piled all around the yard. Just starting the cuts now. The dust is flying. Wow they hand chisel the edges. This looks like a lot of hard work.
They have brought in a huge amount of huge Oklahoma Wister flagstone. It's piled all around the yard. Just starting the cuts now. The dust is flying. Wow they hand chisel the edges. This looks like a lot of hard work.
Blaze, looking good! Houston here too, South Bay did my gunite last week as well. If you don't mind, can you post some pics of the coping when they're done? We're trying to decide between the OK Wistor or travertine coping. Would love to see yours when done.
Also, what stamped concrete design are you going with?
Also, what stamped concrete design are you going with?