Hello all. My husband pulled the wires from my Intex above ground pump with the lawnmower. Nothing was cut, but the wires were pulled from their connections. I have no idea how to reconnect. I have searched everywhere and called Intex. Intex does not post wiring diagrams due to liability. I just need a picture of a functioning SF8011-1 or similar pump wiring. My pump has a squarish top with four screws. From about 2017/18. Please, if you have a picture to share I would sure appreciate it. I have just retired, so no money to buy a new pump.
SF8011-1 Intex wires pulled out
- Thread starter Mrsccc
- Start date
- Jul 21, 2013
- 65,751
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
This the same problem you posted about last November?
www.troublefreepool.com
Pool Pump SF80110-1 wire connections
My husband ran over the cord for my pool pump. The cord was not damaged, it just pulled everything lose inside. I have yet to be able to find a wiring diagram for this model-Intex-SF 80110-1. If anyone has a picture of what the inside looks like so I can reconnect the wires, It would be greatly...
www.troublefreepool.com
- Jul 21, 2013
- 65,751
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Retail stores do not like the ethics of this but buy the same pump from a place with a good return policy, study the wiring when you get it, keep all the packaging, if you fix the old pump then return the new one, otherwise keep the new one and go swim.
Thanks. I thought of this, but the pump is several years old. I don't know where I would find one like it.
- Jun 1, 2018
- 16,099
- Pool Size
- 26000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-15)
- Jun 1, 2018
- 16,099
- Pool Size
- 26000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-15)
I
I have 1 thats bigger than yours & one that’s smaller - this is the smaller one. They both appear to be wired the same way
Awesome! Thank you so much! Addendum:IT WORKED!!! There were at least 4 sets of hands trying to figure this out. I even took the suggestion of another poster who said to purchase one like it. Alas, I ordered this exact model, but another was substituted. So what I received was not the same.THANK YOU AGAIN.
Last edited:
- Jul 21, 2013
- 65,751
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
- Jun 1, 2018
- 16,099
- Pool Size
- 26000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-15)
To be fair- i never saw the 1st post or I would have totally done this before ? probably because it was in the off season for pools & i was skimming around in spa threads lol