Although ORP won't show on the main dashboard page of the mobile app. I think if you select the body of water it will still show ORP reading on that screen under chlorinator tile, it that doesn't work you may have to go further and select the chlorinator tile and you might see it on that screen.
Take a look at this excerpt from the HL-CHEM Manual below. Its from Page 10. I believe if you go back through the Config Wizard and Select 'No" when asked if ORP controls Chlorination you may be able to get your ORP readings even though it will not control the SWG. Unless the pics you sent are of the system with NO already selected? I would suggest you contact Hayward to confirm as I don't have an SWG in my setup. They also may be able to figure out a way for you to see ORP readings.
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.
Welcome to TFP! For a wealth of pool care information please check out our free Pool School. If you are in need of specific help then we encourage you to Register and ask us here in the forum!