Second hand Maytronics Premier

[beachhouse]

Hi all,
I have just bought a Dolphin Premier robot at a garage sale ($200 with caddy). I did a basic test: the robots turns on, and both the impeller and the brushes spin properly.
I hope someone knows the robot, and can help me with some questions.

1) Is there any way to know the manufacturing date of the robot? I checked all the labels, but I could not find any dates. I know that for appliances, you can usually find the manufacturing year within the serial number, but the serial number of my robot seems random. This robot is still sold on Amazon, but it looks this model has been around since 2012.

2) I checked the user manual, and I realized that the robot originally came with a leaf bag, a set of fine filter, and a set of ultra-fine filters. My robot only came with a leaf bag. Would recommend spending $100 for the ultra-fine filter? Or is the leaf bag enough for everyday use?

3) I am planning of tuning-up the robot during the winter (I won't use it until June 2024). What would you recommend checking / replacing? I was thinking about replacing the climbing rings (they became "hard"). Is there any other maintenance you would do?

Thanks,
Fabio

 

[Mdragger88]

try putting the serial number in here

Maytronics-Registration

registration.maytronics.com

Ymmv on the ultra fine needs - may wanna see how you get along first.
Once you know for sure exactly which model you have and its age you can go here to see which commonly replaced parts are available-

Robotic Replacement Parts - Maytronics Premier

Lowest Prices Guaranteed. Authorized Service Center – All Maytronics Dolphin Parts Available. Call 303-985-0077 if you do not see your part or pool cleaner listed below.

marinapoolspaandpatio.com

the brushes & tracks are consumable parts. The older it is the more likely you will want to replace wheels/tracks or maybe just have them on hand.

 

[JoyfulNoise]

I wouldn’t put ANY money into it unless you verify that it will actually clean your pool. It’s great that it passes the self test but that’s really not telling you much. You need to see if it will complete an entire clean cycle without failing.

OLD ROBOTS = OLD MOTORS = EXPENSIVE FAILURE

If the motor assembly is old, and it fails, you’re looking at $400-$500 to get a new one. If you dump $100 worth of parts into it now, and factor the $200 you acquired it for, you’re half way to the cost of a new, low-end model robot. I suggest you see how it performs in your pool before you sink anymore cash into it.

 

[beachhouse]

Thanks!

@Mdragger88 I tried to input the serial number in the registration tool, but it doesn't tell me the manufacturing date. I sent an email to Maytronics to see if they can find out how old the robot is

@Mdragger88 I agree on the ultra fine filter. I bought one for my Dolphin Nautilus CC, but I ended up switching back to the standard fine filter because the ultra-fine one wouldn't pick up much debris (especially sand and leaves). I guess I'll stick to the leaf bag for now.

@JoyfulNoise Good point. I'll wait until June. I'll probably do an internal cleanup without buying any new parts. I need to find a way to spend my time during the cold NY winter

 

[wireform]

If your pool is covered then just peel back a corner and drop it in to see what it does / doesn't do. I couldn't wait till next season if I were you.

 

[Jimrahbe]

Fabio

I had a Premier and it lasted over 7 years,,

The only thing I would change are the tracks, assuming they are worn down..

Other than that, I'd use it until it died.

Thanks,

Jim R.

 

[beachhouse]

Fabio

I had a Premier and it lasted over 7 years,,
The only thing I would change are the tracks, assuming they are worn down..

Did you like your Premier? I currently have a Nautilus CC, and the Premier seems like a nice upgrade, even though it's an old model.

I removed the impeller cover and discovered a mark that shows September 2017 as the manufacturing date.
I guess the robot was purchased in 2018.
Here in Long Island (NY) we have a relatively short pool season (4 months), so I hope my Premier can last 2-3 more years.

The tracks are not worn down but they are a bit loose. I'll evaluate if they need to be changed when I test the robot in the pool.

And of course, I'll need to buy the assembly with the filter panels, since the previous owner couldn't find it.