Sealing the hydrostatic disc

[Madibaa]

Hello everyone
I realized there is a leakage in my pool. After draining the pool, I found out the plug at the bottom of the pool was damaged from one side (attached are some photos). I could not find a similar plug in the market, so I want to seal it. Can anyone help me and give me some tips? like what kind of sealant and where I can find it.
Cheers,
Hossein.

 

[Texas Splash]

Welcome to TFP! If you are not able to do a permanent HS valve fix at this time, perhaps install a winterizing plug in there for now. Probably a 1.5" or 2" plug and that should last for a while.

 

[Texas Splash]

You'll see some plug examples in the link below.

Closing Pool for Winter - Further Reading

www.troublefreepool.com

 

[Madibaa]

Hi mate
Thank you for your reply. I am after the sealant material to fix the present plug. I have heard that silicone grease can do the job. what do you think?
cheers

 

[Texas Splash]

I am after the sealant material to fix the present plug. I have heard that silicone grease can do the job. what do you think?

If you want to be able to remove the cap later, a good quality silicone might do the trick. I'm not real familiar with your type of valve/cover. Let's see if any of our members or staff have additional thoughts.