My contractor finished a complete overhaul of our pool. Redo vermiculite, new pipes, new liner, new DE filter etc. About a week after we paid him, we noticed a 1" screw trapped, tight enough so you can see the threads (see photo attached, taken underwater, next to a quarter for size), at the bottom of the deep end! The contractor says he will come back and roll it into the vermiculite. If it were a pebble, I'd feel more comfortable, but this is a very pointy screw! The options are few, I guess: roll it in or he takes out 40K of water and redoes it. Any advice greatly appreciated!
![screw under liner.jpg screw under liner.jpg](https://www.troublefreepool.com/data/attachments/67/67278-b5c4a95bd58d345ca42d256987b920b4.jpg)
Kate
Providence Rhode Island
20X40 vermiculite, vinyl
![screw under liner.jpg screw under liner.jpg](https://www.troublefreepool.com/data/attachments/67/67278-b5c4a95bd58d345ca42d256987b920b4.jpg)
Kate
Providence Rhode Island
20X40 vermiculite, vinyl