The image above looks like a PC based configuration screen. Can you tell me how to access via PC? I use the Screenlogic iphone app only at this point, but this looks like a far better way to go.Joe,
Either the pump is controlled by the EasyTouch/ScreenLogic, OR it is controlled by the pump's control panel.. One has nothing to do with the other...
Go out to your pump and look at the display.. For the ET to be in control, the pump must say "Display Not Active"..
Please let me know what the pump's display says...
Post the following page from your ScreenLogic set up pages...
Thanks,
Jim R.
Thanks so much,
David